Ir. Prof. PL Yuen (President, HKIE) gave an opening speech. Construction Industry is challenged by digitalization. It would enhance efficiency, cost saving and safer in construction project using new technology, especially Design for Manufacturing and Assembly (DfMA) in Construction. Innovation is the key for engineer.
Ir. Dr. Hon Lo Wai-kwok (Legislative Councilor for Engineering Constituency, HKSAR) gave an opening speech. Dr. Lo supported using Systems into MIS division rename. Government provided funding for AI and Robot in 2018 and support innovation in construction such as BIM. He believed today’s conference could bring insight for strategic direction to overcome pandemic challenge.
Then Mr. Peter Lam introduced DfMA that transferred construction to manufacturing process through Design for Manufacture and Design for Assembly. And then he briefed government policy included Modular Integrated Construction (MiC) in 31 Mar 2020.
After that Mr. Lam compared Service and Product which were similar to Construction and Manufacturing. Service – Don’t see the deliverable and Product – Don’t see the process.
Finally, he introduced the DfMA framework from tier 0 to tier 3 and then shared some case studies such as AMC.
The second keynote speaker was Mr. Gary Yeung (President of Smart City Consortium) and his topic entitled “How’s Your Smart City Readiness in a Digital Era?” In the beginning, he played a video to show the future smart city.
Then he mentioned smart city 1.0 was technology driven. Now, Data is “New Energy” and model was showed in the following diagram. He also said smart city 2.0 was government driven by leveraging IT infrastructure and incorporating innovative solutions in urban planning.
Finally, Mr. Yeung introduced smart city 3.0 that was driven not just by technological expertise, but also by the citizens’ overall demand for a better quality of life. (People-Centric). Lastly, he briefed idea about GBA smart city cluster and the overall framework was demonstrated.
The third speaker was Prof. Jack Cheng (Associate Professor, Department of Civil and Environmental Engineering, HKUST) and his presentation named “BIM + With Blockchain for Engineering Design: Opportunities and Challenges”. Prof. Cheng firstly briefed BIM-based engineering analysis.
He briefed the future impact and likelihood of new technologies in Construction especially in BIM that located in the upper right side. Then he also mentioned the BIM plus VR/AR to enhance user experience.
Finally, BIM information management (for design) with blockchain-based common data environment (CDE) were demonstrated (e.g. ISO 19650-2:2018).
Lastly, Prof. Jack Cheng summarized all into People, Process and Technology for smart tech adoption in BIM with Blockchain for Engineering Design.
The fourth speaker was Ir. CK Ng (CEO, dROW Limited) and his topic was “Digital Construction According to ISO 19650”. Firstly, Ir. Ng briefed ISO 19650 in Digital Construction including BIM and changing our digital behavior.
Then Ir. Ng briefed ISO 19650 UK guidance from part 1 to 5 and from A to F. The standard structure was showed in the following diagram. Some changes and challenges were discussed such as EIR from Employer IR changed to Exchange IR (Information Requirement), Level of information need, and from single source CDE to multiple CDEs (where CDE stands for Common Data Environment).
Finally, Ir. Ng discussed several ways to follow ISO 19650 that including OIR, Digital behavior, CDE and Security. In guidance C, it stated CDE requirement that should be findable, reliable and reusable. Your CDE should be digital hub rather than digital silo.
The last speaker was Mr. Stephen Au (Managing Director, MTECH Engineering Co., Ltd.) and his topic entitled “Digital Twins for Asset Life Cycle Management”.
Mr. Au briefed the contact of talk including digital twin, creation and its facility management.
Lastly, Mr. Au briefed the process of developing digital twin and demonstrated some cases such as 2008 Beijing Olympic Stadium, Swire building and Nan Fung group project, etc.
Panel DiscussionAt the end, Mr. Eddy Wu (Chairman, MILESAA, PolyU) gave vote of Thanks.
Reference:
HKIE-MIS - http://mi.hkie.org.hk/
MIS Division (previous MI
Division) related seminar:
20190907: HKIE Seminar on Smart Manufacturing – How to use
digitalization management to improve productivity? - https://qualityalchemist.blogspot.com/2019/09/hkie-seminar-on-smart-manufacturing-how.html
20170811: HKIE Seminar on “When Electronics Meets Medical Science” -
https://qualityalchemist.blogspot.com/2017/08/hkie-seminar-on-when-electronics-meets.html
20170320: HKIE Seminar on Quality Innovation – Introduction of
Extenics - https://qualityalchemist.blogspot.com/2017/03/hkie-seminar-on-quality-innovation.html
20170225: Technical Seminar – The Opportunities and Challenges of
Incubatees in Hong Kong - https://qualityalchemist.blogspot.com/2017/02/technical-seminar-opportunities-and.html
20170106: HKIE Seminar on Continuous Education for Career
Development in HK Industry - https://qualityalchemist.blogspot.com/2017/01/hkie-seminar-on-continuous-education.html
20160429: HKIE-MI AGM Seminar on Developing an Innovation Workforce
- https://qualityalchemist.blogspot.com/2016/04/hkie-mi-agm-seminar-on-developing.html
20160415: HKIE MI Division Gala Dinner 2016 - https://qualityalchemist.blogspot.com/2016/04/hkie-mi-division-gala-dinner-2016.html
20160229: HKCIE Seminar on Extenics (可拓學) - https://qualityalchemist.blogspot.com/2016/02/hkcie-seminar-on-extenics.html
20150820: HKIE Seminar on Industry 4.0: The 4th Industrial
Revolution - https://qualityalchemist.blogspot.com/2015/08/hkie-seminar-on-industry-40-4th.html
20140329: HKIE MI Symposium – Innovation and Technology for Business Evolution - https://qualityalchemist.blogspot.com/2014/03/hkie-mi-symposium-innovation-and.html
沒有留言:
發佈留言